pH and conductivity ( EC ) probe care kit by Bluelab.
The instrument is only as accurate as the probe is clean.
Probe cleaning is one of the most important parts of owning or operating any Bluelab meter, monitor or controller. If the probe is contaminated or dirty, it affects the accuracy of the reading displayed. The Bluelab Truncheon® Meter and Bluelab Conductivity Probes read low when the probe is contaminated.
The probe surface is where the instrument takes the reading of the solution. The information is sent back from the probe to the electronic brain of the instrument. A calculation is then done in the instruments brain or micro-computer and a reading is then displayed. If the information sent back from the probe is inaccurate due to probe surface contamination then the reading will be inaccurate.
Cleaning the conductivity or pH probe is a very easy task and prolongs the life of your probe.
Contains:Probe care instructions
20ml single-use Bluelab Solution Sachets, 2 each of pH 7.0 & ph 4.0, KCI, 2.77 EC
3 x plastic cups
Bluelab pH Probe Cleaner
Bluelab Conductivity Probe Cleaner
Bluelab Toothbrush ( pH probe cleaning instrument )
Bluelab Chamois ( conductivity probe cleaning instrument )